Followers

Monday, October 27, 2014

Craft-Room Challenge presents Vintage Christmas



The inspiration for this card was the new challenge at Craft-Room Challenges.  The theme was chosen by Zoe and for challenge #88, its Vintage Christmas.  I love old ornaments and such but I couldn’t think of anything to suit vintage Christmas – until I saw the beautiful paper I used on the card.  As I have said before, my craft room is typically messy – and especially around this time of year when I am creating like a crazy woman.  I had piles of papers here and there and happened to turn over this piece and I knew I had found the perfect paper to use on my card!  I think this card captures the spirit of a Vintage Christmas.
The picture doesn't do it justice
What I Used to Make My Card:
Kraft cardstock base
KaiserCraft “Art of Life” Collection, P1401, Every Day
Spellbinders Shapeabilities Die-Delights, Petite Labels One, S3-205
Scrap of Cream (Vanilla) Cardstock
Tree Cutfile
Silhouette Cameo
Tim Holtz Seasonal Chit Chat
Distress Ink in Pumice Stone



I don’t have a long tutorial for you because it is a really simple card.  I had already had one of the trees cut from an earlier project, so I just sized the two remaining trees to complement that one and cut them using the Silhouette.



See the sparkle?
I made sure the words I chose from the Chit Chat fit inside the die I wanted to use for the label,  then I die cut the label out of the cream cardstock, adhered the stickers and edged the label with Pumice Stone Distress Ink (I just used the pad).  I arranged the trees and the sentiment, glued everything down and there you have it! I really enjoy the simplicity of the card and I think the middle tree (the extra one I had) being cut from glitter cardstock adds the perfect bit of glitz.  I hope you agree and enjoyed this mini-tutorial.  As always, thank you for stopping by, your visits and comments mean the world to me!  Now, get your holiday spirit on and make a vintage project to share at the Craft-Room Challenge!

PS: It looks like I added something to the Kraft card I used for a base - I didn't use anything on it, the photo just made it look sorta grainy.
And another look at the final card.  Love that sparkly tree!
I would like to enter my card in the following challenges:
Completely Christmas - #35, Anything Goes, Twist: Use a Setiment
Allsorts Challenge - #282, Christmas 
ABC Christmas Challenge - U is for Uncolored (I didn't color anything)
Simon Says Stamp Wednesday Challenge - Get Crafty & Use Kraft (my card base)


Sunday, October 26, 2014

Spooky Skull Wall Hanging



I recently bought the Tim Holtz Alterations Skull Blueprint which, in case you don't know, gives you the dies to cut out certain stamped pieces of course this isn't the only one I bought; but those will be introduced on another day.  I am Halloween crazy, and skulls and skeletons are my one of my favorite Halloween embellishments.  In fact, throughout my home, you’ll spot skulls tucked in various places because they aren’t just for Halloween in my world!  A while back I commandeered some scrap wood and had my resident handyman cut it into panels I could use for my art.  This project is born from my love of all things Halloween, Tim Holtz and one of those panels.


What I Used to make My Project:
Wood panel (approx. 7” x 7”)
Gesso
Golden Acrylic Paint in Micaceous Iron Oxide & Carbon Black
Tim Holtz Idea-Ology Paper Stash in Laboratorie
Tim Holtz Alterations, Skull Blueprint, #659375
Grey Paper
Ranger Archival Ink in Jet Black
Paper Frame cut with Silhouette Cameo
Black Paper for frame cut out
Thin Pop-Dots
Dresden scrap
4 Silver Skull Charms

First thing I did was gesso the wood panel.  Since wood soaks up paint like crazy, the gesso adds a barrier between the wood and the paint.  After the gesso was dry, I followed up with one coat of Carbon Black paint so I wouldn’t have to use too much of the Micaceous Iron Oxide paint (it is my favorite color and it has such a cool sparkle to it when it dries) and waited for that to dry.  Once I painted a coat of the Micaceous Iron Oxide I moved on to making the skull while I waited for the last coat of paint to dry.

I stamped the skull with Jet Black ink on the grey paper, and then lined up the dies with the stamped image.  My dies have a tendency to move when I am
3D - and no special glasses required!
rolling them through the machine (I am sure it has nothing to do with the fact that I need to use all my strength half of the time) , so I used a bit of removable tape to hold everything in place.  I cut the entire skull, then just the head part and finally the jaw.  I pop dotted them together for a bit of 3D action.

I had already cut the frame for another project so I had it lying around with the Dresden scrap.  This time of year I have lots of things lying about as I am usually creating like crazy and being neat is not an issue for me in my room – thank goodness!  I picked the paper out of the Laboratorie Paper Stash and cut it out.  It is from a
sheet that had four squares on it, each square was a different pattern, so I didn’t need to crop it or anything. 

I laid everything out, tweaked this and that, and finally glued everything to the paper before I glued the paper to the wooden panel.  Once I glued the paper, I finished up with the little silver skull charms (with the holes cut off) and put one in each corner.  I literally built the piece around the skull because I think it is so awesome!  


I hope you enjoyed your visit here & I'd love to go to your blog and see your Halloween creations, so please be sure to leave me your blog address in the comments box.  Happy Halloween! ~ Christi

I am entering my Spooky Skull in the following challenges:
Sisterhood of Snarky Stampers - #19, H is for Hopeful Halloween 
Simon Says Stamp Monday Challenge - Anything Goes
Craft Hoarders Anonymous - #18, Layer it (use at least 3 layers)
Haunted Design House - Week 1 of Hellacious Halloween
A Vintage Journey - #17, A Halloween to Die For

Sunday, October 19, 2014

Spooky Skeleton Shadow Box ~ Autumn Magic with Anything But a Card

The current challenge over at Anything But a Card is a seasonal one; you can choose between "Autumn Magic" and "Spring Wonder".  Since fall is my very favorite time of year, with my very favorite holiday smack in the middle of the season, I chose to work with "Autumn Magic".  What is more magical than Halloween?  How about a skeleton in a cemetery? OK, so not exactly magical, but I had so much fun making my Skeleton Cemetery Shadow Box that I had to share it!
The cool stand with the skeleton heads isn't part of the box - but it's awesome isn't it?
What I used to Make this Project:
Tim Holtz Configurations Box - 5 3/4 x 5 3/4, TH92883
Big Shot machine
Tim Holtz Mover & Shakers Die, Vintage Cabinet Card Mini, 657206
Scraps of Grey (various shades) & White cardstock
Scrap of Chipboard
Skeleton (Dollar Store)
Wendy Vecchi Archival Ink in Potting Soil
Somerset Studio paper "Dark Woods"
Distress Paint in Gatherd Twigs
Tim Holtz Mover & Shakers Die, Mini Bat & Skull Set, 657458
Pumpkins (I got mine from Alpha Stamps)
2 Small Red Gems
Dresden "Arch" - black
Embellishments
Crafters Pick The Ultimate Glue


Almost looks like wood
First, take all the little boxes out of the configuration box and set aside. You won't be needing them now but won't they make cute Holiday Ornaments?  Then paint your box with Distress Paint in Gathered Twigs, I just used the sponge dauber on the bottle and rubbed it all over the box, both inside and out.  I took the Somerset Studio paper and cut  it to size so it would fit in the box, covering the back wall and the sides.    


The Mini Cab Card Die
I discovered the tombstones by messing about with the Mini Vintage Cabinet Card die.  I noticed if you trim down the sides of the die cut you can make some pretty cool tombstones.  So that is what I did.  I actually made 3 to use, but I ended up using only 2.  The white stone was to be my focal point because the skeleton fit nicely behind it.  I made the tombstone names in Word and printed them on cardstock and trimmed them to size, as well as the
other shade of grey I used behind the names (in case you can't read them, the white tombstone says  "Eve L. Minion" and the grey reads "Reid N. Weep").  I also drew some cracks into the grey tombstone using a Micron Pen and aged the white one using Wendy Vecchi's Potting Soil ink (truthfully, I wanted the white one to stay white, but I got a bit of the Gathered Twigs paint on it after it was all ready to go and there was no way I was making another one. Don't tell anyone).



Next I fixed the tombstones so they'd be sturdy enough not to bend.  I had already cut them out of cardstock, and I considered re-cutting them out of chipboard, but then I decided to make chipboard "brackets" to glue on the back of them that would be fine.  At the bottom of each tombstone I bent a small lip and attached the bent strip of chipboard to the back of the stone so the
bottom was a longer lip (and stronger) part of the chipboard was available to glue to the scene (picture a long L made of chipboard). Shockingly, it worked like a charm! No one was going to be poking or touching the stones, so they didn't need to be seriously anchored down.  Next was attaching the skeleton to the white tombstone.



 Since the skeleton was too tall, I snapped his legs off and daubed him with the Gathered Twigs paint to age him a bit more. I really wanted to get some dirt and roll him in that but I wasn't about to go out in the freezing cold yard and try to dig some up - plus it was late (after midnight) and we have a sensor light in the back of the house.  So I settled for some Gathered Twigs paint and dried him with my heat gun (the paint didn't really dry on the plastic, so be careful! You don't want a situation like I had above).  I also glued some little red gems in his eyes, reminiscent of the skeleton I used here.  I draped him behind the tombstone and set him up to dry overnight.



I already had the bat cut out - it was cut out of chipboard and painted black with acrylic paint.  The pumpkins, black cat, cameo and leaves are from my stash. I do have to tell you about these leaves. I am not sure where I bought them, but they were made for people who make those elaborate railroad displays and this bag has lasted me many, many seasons.  The Dresden arch came from a sheet I had gotten many, many moons ago.  I was tempted to hang a Happy Halloween" banner of some sort on the bottom of the box, but, after consideration (and the fact that somebody wants to display it all year long in his room) I decided to leave it off.

 
And another look.  Hope you enjoyed the tutorial!
So there we go - my first ever Configurations box! I have been pinning them and drooling over how amazingly creative people have been using them, but I haven't had the occasion to actually use one (and I have a few more in the stash).  I had a blast making it and the weight is so light compared to wood.  And, as I said, those little divider boxes that I didn't use will make cute ornaments, in fact, the top and the acrylic cover will make a nice frame. . .hmmm.  Better go write this down!   There is still time to enter the "Autumn Magic/Spring Wonder" challenge at Anything But a Card - even if you don't want to enter, pop over and check out the amazing creations my teamies have made.  We recently had a DT call and now we have so many creative people on board that you will want to check the blog at least once a week - trust me! Have a great day and thank you so much for stopping by.  If not for you. my followers, I would have no reason to do this.  Blessings to you & yours, Christi 

I am happily entering my Spooky Skeleton Shadow Box in the following challenges:
Delicious Darkness - #3 (October Challenge), Anything Goes, optional Halloween Twist
Buckwells Crafty Challenge - #1 (October Challenge), Anything Goes 
Altered Eclectics - (October Challenge), Anything Goes
Crafting at the Weekend - #6, (October Challenge), Anything Goes
Stuck on U Sketches - Die Cut Challenge, Anything Autumn
Open Minded Crafting Fun - #21, Pumpkins/Jack 'O Lanterns
Punk You Girl - (October Challenge), Anything Goes with an optional Halloween Twist


On another note, we are looking for some help over at Challenges for Days - it's really simple to help us keep the lists updated, you only need about an hour a week.  Why not help others (and yourself) find some awesome challenges to enter? If you think you can help us out, please drop an email to our wonderful founder, Zoe (zoechaos@icloud.com).  Even if you can't help right now, please take a look at all the exciting challenges we have listed and don't forget to bookmark us - we update the list daily and we are always adding new challenges!

Monday, October 13, 2014

Making Your Own Background for Craft-Room Challenges



The most recent theme over at Craft-Room Challenge  has been chosen by the talented Mervi and she decided to challenge us with making our own background.   Knowing that Halloween is right around the corner I knew I wanted to make a card pertaining to the holiday, so I dug into my stash of alcohol ink backgrounds and this is the result.
 
You can't really see the little stars, but they are there!
What I Used to Make my Card:
Alcohol Ink Background (pre-made using blues, purple and Silver Leaf Pen)
White Card Base, square, 5 ¼ x 5 ¼
Round Punch, 2 inches
Witch Cut File
Silhouette Cameo
Black Cardstock
Happy Halloween from Tim Holtz/Stampers Anonymous “Simple Sayings”, CMS155
Silver Paper Scrap
Silver Sequin Stars (tiny)
Silver Ink from Colorbox Pinwheel “Alchemy”
Silver Siam Embossing Powder from Globecraft & Piccolo
Glue (I use Crafters Pick The Ultimate)

If you don’t have your alcohol ink background made, do that first.  I made this using the old Polished Stone method, you can search for it, I searched “polished stone technique” and came up with quite a few options, and even videos, to show you how to achieve the effect.


Once your background is done, trim it down to fit on the front of your  base card.  I trimmed a ¼” on each side so I could leave a bit of the white cardstock showing.  But I found it easier to build the card on the background before I glued it to the card base.
 
She reminds me of Bewitched!
I searched my cut files and found this cute witch. I like her because she isn’t your typical scary looking witch with a wart on her nose and a scowl on her face.  I cut her out using my Silhouette Cameo machine and black cardstock.  I punched the moon out of silver cardstock using a circle punch.

I used a scrap of white cardstock for the sentiment.  I stamped the Happy Halloween in silver ink and then embossed it with silver embossing powder.  At that point I felt the card was done.  I put it aside so I could write this post.
 
Something is missing. . .
When I looked at the card the next day I wasn’t as happy with it as I was at first.  It needed a little something more. Since my desk was an absolute mess, covered with everything and anything Halloween related I spied the little silver stars and I thought that since the witch is riding her broom at night, so little stars were in order.  After I put the stars on the card, in no particular order, I was happy with the card again. I wish they showed up in the photograph better but Mew was happy to pose for all of you!
 
My own little black cat, Mew, and the card.  You can actually see the stars!
So there you have my second Halloween card this season.  I am very far behind, and honestly, I doubt I’ll be sending any out, but I just LOVE the holiday so much, I know I will make more cards, most likely when I should be making winter holiday cards to send out.  I hope you enjoyed my little tutorial and there is still 2 weeks to get in on the Craft-Room Challenge “Make Your Own Background Theme” (challenge #87) – hope to see you there! Christi

I would like to enter my Witch Card in the following challenges:
Artistic Inspirations -(w) #113,  Make Your Own Background
Craftin' Desert Divas - (2w) #42, Halloween
Bloggers Challenge - (2w) Halloween
Addicted to Stamps - (m) #116, Anything Goes
One Crazy Stamper - October Challenge, Christmas/Halloween (I chose Halloween)
Die Cut Divas - October Challenge, Change of Seasons, Spring/Autumn (I chose to go with Autumn)