Translate

Friday, February 28, 2014

Hanging Snowflake Altered Art. . . .



I love to make use of items that I’d normally throw out and the main components of this project contain exactly that.

Hopefully you saw my two previous projects using the Globecraft & Piccolo Bejeweled Snowflakes accents set, if you need a refresher you can find them here (Snowflake Votive) & here (Happy Winter Card).  For this project, I used the little snowflakes that are in the set and my "stencil" that I made and used for the Happy Winter Card.  There are 6 adorable snowflakes, measuring about 3/4", that I had left in the set, so I used them up!  

Before I get into the tutorial, let me tell you about the products I used:
Small Snowflakes from Bejeweled Snowflakes   
Stencil I used in making the Happy Winter Card (from Bejeweled Snowflakes  
Frame, 7” x 7” square
White Gesso
Distress Paint in Stormy Sky
Dylusions Spray Ink in London Blue
Ranger Archival Ink in Jet Black
Fishing Line (or other clear string material)
Oval Word Charms
Piece of White cardstock
Sentiment “Warm Winter Wishes” by Quietfire Design 

I know it seems like a daunting amount of stuff but most of it you use only once.  First thing I did was work on the snowflakes.  I had originally wanted to have one side glitter and one side embossing enamel but that didn’t work out very well. 
I know I could of made this work, but I didn't really like the glitter
The detail in the flakes was a wee bit too defined for the glitter I had so I switched to embossing both sides.  
These are only embossed once - like my fingerprint?
I embossed both sides about 3 times (don’t forget to roll your jar of embossing enamel – it blends all the granules and colors perfectly!), which was tricky because each time I embossed a side the other side grew hot as well and would end up either slipping off or making a finish that I didn’t like.  My solution was to go slower and use a lighter touch with my heat gun; I also wonder if the fact that I have a Weller Heat Gun which is actually made for industrial applications may have caused the powder on the other side to keep reheating so much. When I find my regular crafty heat gun, I will do an experiment and see if the heat was too hot.

Once the flakes were embossed to my liking I set them aside to completely cool.  At this point, I wasn’t sure how I was going to hang them but I had a very vivid picture in my mind of how I wanted the assemblage to look – I thought about threading fishing line through each flake, of tying each flake to cord, using fibers, and a few other ideas.  The more I thought about it the more I liked the idea of having the flakes hang invisibly – so I used fishing line! 
In the picture, you can barely see the fishing line stretched across one of my homemade art boards (cardboard covered with wax paper) and held in place with painters tape.  I then glued each snowflake to the line with E6000.  I made sure I used plenty of line and I matched up the snowflakes so they would all be in about the same place.  I let them dry overnight.


Way too dark!
I went to work on what I think is the focal point of the assemblage, the “stencil” I made from the Bejeweled Snowflakes set – the stencil is actually made out of the waste leftover after all the items are punched out.  This is the third project I am getting out of just one set.  When I made the Happy Winter Card, I had spritzed the stencil with Dylusions Spray Ink in London Blue to make the image on the card.  The stencil was really saturated with the spray ink and much darker than what I wanted for this project so I painted some gesso over the London Blue and got the perfect, icy baby blue color I wanted.  Then to give the stencil a bit more stability I painted over it with Glasstique Gloss FinishingGlaze.
Perfect!!!
The frame that I used came from a picture bought at the Dollar Store and had gotten ruined – and the frame was originally black. So I gessoed over the black, twice to be sure it was covered completely and then colored it with Distress Paint in Stormy Sky using a paint brush dipped right into the bottle.  I finished it off with a few light spritz of Dylusions Spray Ink in London Blue, let it dry a few seconds and swiped it very lightly with a baby wipe. 

I had already stamped the sentiment on a piece of white cardstock using Ranger Archival Ink in Jet Black; all I need to do was trim it up a bit and it was ready to go!


All the pieces ready to be assembled!
Now that all the pieces were done the fun part – putting it together!  This is when I discovered my fishing line refused to stay straight and kept curling up on me.  No fear! I dug into my charms stash and decided that these oval word charms would fit the bill nicely.  I attached one to the bottom of each snowflake line and they worked like a charm (pun intended), in addition to tying the fishing line, I also added a dab of E6000 to each knot.  Now that my curling issue was fixed, I moved on to getting the stencil ready to be attached to the frame.  First thing I did was poke 3 holes into the stencil and thread the fishing line with the snowflakes through the holes, being careful to make sure all the lines were even with each other, then I flipped the stencil over and used E6000 to glue to fishing line to the back so the rows of flakes would stay put.  I let that dry overnight.
The finishing touches are easy – I glued the stencil to the inside of the frame & then attached the sentiment.  It took a bit of thinking and problem solving but I think this is an awesome winter decoration.  I hope you had as much fun reading about it as I had making it!
Another view
Next week I officially start spring, regardless if the weather cooperates or not.
Thanks for reading and I hope you & yours have a fabulous week!
Christi

I am entering my creation in the following challenges:
Love to Create Challenge  #104 Anything Goes!
My Craft Creations  Anything Goes
All Crafts Challenge Feb/March  Anything Goes
Tuesday Throwdown  Anything Goes
Simply Create Too Anything Goes 
Altered Eclectics Anything Goes 
Artful Times #50 Anything Goes

Friday, February 21, 2014

Elegant B&W Card and Globecraft & Piccolo SPRING RELEASE!



I hope you have been to the Globecraft & Piccolo Blog this week, you have GOT to see all the goodies my Teamies came up with to celebrate the New Spring Release

I love black & white, I think it is so elegant – and to continue with the elegant theme, I made this “Thinking of You” card using one of the NEW Flourish sets.  Honestly, I had another project planned, but life got in the way, so I am sharing this lovely card.
Here is the finished card
The card was simple as I had all the ingredients here.  It’s larger than most cards I make measuring 6” x 6”, but I wanted to give a proper showcase to the embellishments and the lovely textured paper I used.

This is all you need to make this card:
  • NEW A157 Vintage Corner Flourishes 
  • Micro White Embossing Enamel
  • Enamel & Embossing Powder Adhesive Fluid
  • 6” x 6” black white base
  • 5 ¼” x 5 ¼” embossed black cardstock (I used paper from Francis Meyer, but you could just as easily make your own)
  • Sentiment (I used an old SU! set called “All Year Cheer”)
  • Black Cardstock
  • Pop Dots 
  • Cream & Black Strip (I got mine from GCD Studios Paper Pad “Paris Nights”)
  • White Cardstock for your Sentiment
  • Ranger Archival Ink in Jet Black
First, emboss your Flourishes with the Micro White Powder.  I embossed the flourishes about 6 times, coating it with more Embossing Fluid & Micro White Embossing Enamel each time to get the coverage I wanted but since the powder is micro fine I hardly used any of it at all.  Set these aside.  Stamp your sentiment on the white card and trim to a rectangle, then trim a piece of black cardstock to mount it on, making sure you leave enough room

to place your flourishes.  I fooled around with the placement of the flourishes quite a bit before I was happy and I even trimmed the square down further once I had attached the flourishes on (which was pretty gutsy, if I had made a mistake I would have to think of another project!).  







The beautiful embossed black cardstock
 Then I cut the 5 ¼” square out of the embossed cardstock, adhered that to the base, put the cream and black strip on, then pop dotted the final square that has the flourishes and sentiment on it to give it that much more texture (even though you can't really tell by the photos).

That’s it!  I love the look of the embossed flourishes with the embossed cardstock.  I hope you like it! Blessing to you & yours, Christi








I am respectfully entering my card in the following challenges:
Inky Impressions  #147 Black & White
Crafty Creations Challenge #257 Keep It Simple
Crafting for All Seasons Challenge Blog  #71 Sentiment as Focus
The Cheerful Stamp Pad  #80  Color Challenge, Black & White
Lexi’s Creations Monochromatic
{PIN}Spirational Challenges #95  Anything Goes
Papertake Weekly  Anything Goes


Sunday, February 16, 2014

Love Candle Holder for Anything But a Card



When one of my teamies came up with the idea of doing a Tic Tac Toe challenge I was all for it! I volunteer on a blog that lists challenges and I have seen quite of few of then & I think its fun to make things guided by a few rules.  Not too many rules, just a few.  Here is the Tic Tac Toe board we used:

**Disclaimer - I had pictures of the whole process for this post but they have magically disappeared! So what you are actually seeing are pictures after the project was done. 

While thinking of what I wanted to create and how I wanted to incorporate the challenge into my project , I was actually leaning toward an “un valentine” theme of some sort – like maybe a wall hanging to celebrate someone’s divorce, but the closer it got to Valentine’s Day the more I wanted to stretch myself and make something happy.  While digging through my stash I spied my glass square candle holder the idea just clicked in place!  I used the middle line, vertical, for this; Recycled the tin can, my faux velvet heart and the black is the ink. 

What I used to make my LOVE candle holder:

First, I washed the candle holder with rubbing alcohol to remove any residue on the glass.  Then I just began adding splotches of alcohol ink (using my blending tool and blending solution.  I love that alcohol ink dries so fast because that lessens a chance of me making the colors muddy.  So I colored my holder and set it aside to dry (overnight – I let lots of things dry overnight).

Then I needed to see if my Silhouette CAMEO would be able to cut the faux velvet ribbon.  I cut a few lengths off the roll (yes, I have a roll of it), went into my designing software & re-sized a heart to the size I wanted, stuck the ribbon on the mat and ran it through.  It took some tweaking with the blade, but finally I got all my hearts cut out.  Since these were to be put on last I put them aside.
This is the Faux Velvet Ribbon
Stamping on metal can be tricky because the metal is so smooth; it’s definitely easier than glass, but you still need to beware of possible slippage.  I took my scrap soda can and carefully stamped LOVE about 5 times using the Jet Black ink.  I let that dry.

I wanted something to look like the metal pieces were attached on to the glass holder, my first thought was to take the folding “legs” off some brads and just glue the tops on.  But the heads of the only black brads I had were too small.  So I made my own.  I took my 3D Enamel Gel and just made rows of little dots on my wax paper.  Some of them came out too thin and looked grey, but the more I tried, the easier it became to make them the size I wanted.  Again, these dried overnight.

Then I cut my metal can where the LOVE was stamped.  I used my paper cutter for this but I don’t think all paper cutters are strong enough to handle the metal.  I have a Genesis Trimmer, I have had this thing for at least 16 years and I haven’t even had to change the blade on it.  Yes, it was costly, but I feel the investment was a good one and it has paid for itself over & over again.  If you are interested in more information about them I highly suggest you go to Bonnie’s Best page HERE .  

Once I had all my metal trimmed around my LOVE sentiment and the gel drops were dry I glued the dots to the metal. To me, they look just like if I had used a real brad!  Gluing the metal onto the glass was the hardest thing for me because I have a love/hate relationship with E6000 glue.  I love the way it really makes things stick to each other but I hate the way it seems to get everywhere!  But I had to use it, so I smeared some on the back of the metal panels and stuck them onto the glass, one on each side.  I wrapped rubber bands around the panels to lessen the chance of them bending up and leaving sharp corners (remember, soda cans spend their life in a can position and I was essentially causing the metal to bend the other way). 
I still have some corners and if I had to worry about anyone getting hurt I would have glossed the whole candle holder, with the metal attached, really thickly – like using a resin – but I don’t have any little hands looking to get cut and if I am careful I should be OK.  The elastics did help bond the metal to the glass so that worked well.  Lastly I attached my faux velvet hearts to each side, under the LOVE.  Done!!

I tried a battery operated tea light and it didn’t give off enough light so for this I think I’ll use a regular votive candle until I can get a battery operated one – can I just say I had NO IDEA that there were SO many battery operated candles!! And some of them even have scent! Ah-Maz-Zing!  
I took a bunch of pictures & it is REALLY hard to get one of something that is lit!
I hope you have enjoyed what the Design Team at Anything But a Card has created using the Tic Tac Toe challenge.  There is still time to enter so go ahead get inspired, then create and ENTER!

Thanks!
Christi


I would like to enter this glass candle holder in the following challenges:
Cut It Up - #38, Valentine's Day
Rhedd's Creative Spirit - Anything Goes 
2 Creative Chicks - Re-Purpose Glass
Challenges 4 Everybody - Anything Goes
Craft My Life (All Crafts Challenge) - Feb/March Anything Goes


Friday, February 14, 2014

I Love You shaker card ~

 Shaker cards are one of the things that used to amaze me when I first started to rubber stamp.  I thought they looked so amazingly cool and complicated!  I still love them and I enjoy making them.  I knew when I saw that some of Globecraft & Piccolo’s Accent sets included adorable little frames that many a shaker card would be born! And again, I created a card showing my love of using the nontraditional for holiday cards - you could make this for any holiday or just because! 



To make this card I used: 
 
The frame I used - check out all the others!!
First thing I did was stamp my sentiment on a piece of scrap white cardstock, then I cut it a bit smaller than an ATC – yes, the frames are ATC sized! – and made sure it fit the frame properly.  Set that aside.

Take your frame and cover with Embossing Powder Adhesive Fluid and emboss with Aged White Embossing Enamel, I embossed my frame twice and left it a bit bumpy, covering the frame with the embossing powder adhesive in between layers. If you prefer a smooth finish just keep repeating the embossing steps and heating until it becomes smooth – it shouldn’t take any more than 3 or 4 times to make the finish smooth.  I then edged the frame with my Krylon Leafing Pen in 14k gold, both the inside and the outside of the frame. 
The frame and the acetate
Next, I glued the acetate window into the frame.  For me this is a tricky part because you really don’t want any fingerprints, or glue, to show on the acetate – luckily the piece I used had some tissue paper on one side and it was already cut to fit an ATC so it worked fine.  I used Crafters Pick to attach the acetate to the frame.  Set this aside so it can dry thoroughly, I typically wait until the next day (because I do most of my crafting in the week hours). 

Once your frame is dry it’s time to build the walls that are going to stop your filler from spilling all over the place.  I have some old foam tape that I use and I always use 2 layers so I can ensure the frame will be deep enough and I can sill in all the spots that may be an opening.  Since my tape is old, I use glue in between my 2 layers just to make sure it sticks to the frame and to each other.  
 
The start of my "walls"

Once my walls are built I put the frame under something medium weight, a book for example, and leave it there for a few hours to ensure I have a good bond.  Keep in mind how deep (high) your walls are when selecting filler – you can’t loose with sequins or glitter.  Because my color theme is gold and it’s a “love” card I chose some gold heart shaped sequins and some prisma glitter for my filler, I have had the glitter and sequins for ages & it's nice to use up some of that stash!  I put them in the center of my scrap where I stamped my sentiment.  This way you can see where you are attaching the frame. A few dabs of glue and attach your back to your frame. 
  
I glued my completed shaker onto my card that I made from the matte gold cardstock.  Then I took the accents I had chosen (both sets of Accents I used have a bunch of cute flourishes to choose from) and embossed those with the Vintage Gold embossing enamel, again embossing both twice.  After I was done, I used E600 glue to attach the Accents to the card because the cardstock was a bit slick.  I finished by edging the card with the Krylon Leafing Pen, again in the 14k gold, and I was done!
   
Another view of the card - it's difficult to photograph shiny things!!

I hope this inspires you to create your own shaker cards – they are so much fun! Enjoy! Christi   
 
PS: Don’t forget to take a look at our sister store, Sweet Stamps, for some breathtaking images!

I would like to enter this stunning card in the following challenges:
Papertake Weekly - Have a Heart
Shopping Our Stash - Shiny!
Eureka Stamps - #76 Love is in The Air

Card Makin' Mama's - Make It Sparkle!
Creative Moments - #36 Anything Goes/Love

Wednesday, February 12, 2014

Hello Handsome. . .



People who know me know I am fairly nontraditional & that translates into my crafting.  I really enjoy stretching myself and making holiday cards that don't rely on expected colors or images.  I was looking through some of my paper stash last night when I hit upon this awesome cut out and I immediately decided to make a card featuring this retro man, he looks so dapper, how could I leave him?   

This is what I used:
I took my Masonite heart and embossed it twice with the Antique Gold Embossing Enamel, using the Embossing Fluid each time.  Set aside to cool.

Close up of the heart
I cut the “Hello Handsome” out and found a background paper that I thought matched well in the MME LifeStories Collection.  I cut the background paper to 5” x 3 ¾” and adhered it to the Kraft base card.

I got my Chit Chat stickers and edged them with the Forest Moss Distress Marker and then swiped them with a paint brush dipped in water – they looked stark next to the muted colors of the design so adding just a hint of color helped to soften them.  I took the Masonite heart attached that to the middle of the “Hello Handsome” cut out, placed the 2 Chit Chat stickers around the heart and I was done!  It took me longer to pick out the background paper than it did to construct the card!
It was difficult to get the colors to come out so I posted 2 versions

I hope you enjoyed my little tutorial ~ thanks for stopping by! Christi

I would like to enter my card in the following challenges:
Rhedd & Rosie Challenge #26 - Love is in The Air
The Kraft Outlet - Love
Cards in Envy - Love is in The Air
Crafty Cardmakers #109 - This is a Man's World
Crafty Catz #217 - Love is in the Air
A Creative Romance - Show Us Some Love 
Fussy and Fancy Challenge #107 - Be My Valentine

Thanks!! Looking for challenges to enter?? Please give Challenges for Days a chance to show you how EASY it is to find great challenges!

Friday, February 7, 2014

Happy Winter Card and a G&P GIVEAWAY!!


Hi all you Happy Crafters!  It’s Christi again with another fun card using products from Globecraft & Piccolo. Before I get into my newest creation, I want to let you all know that this is the LAST day to enter for a $10 gift certificate to Globecraft & Piccolo.  How do you enter? 
  • Leave a comment on daily posts Sunday, February 2nd through Saturday, February 8th, 2014
  • You must be a Follower of the Globecraft Piccolo blog
  • You must like us on Facebook (click on the Facebook tab at the top of the blog)
  • Only 1 comment per day per person
  • If you refer a friend and your name is mentioned in their comment, you will get a second entry to the drawing for that day
  • Winners will be chosen by Random.org and announced on Sunday February 9th, 2014
You can win on multiple days so be sure to visit each day - I hope you all have been commenting & I wish you luck!
OK on with the show! 
Here is my finished card.  Read on and you will learn how to make this cute card.
My finished card
This is the second project I have made using just one set of Bejeweled Snowflakes Accents!! After I had removed all the beautiful snowflakes from the board I noticed that there was a stencil possibility hiding within the “scrap” (really, is anything ever scrap to a crafter?) or the negative left after removing the snowflakes.  I carefully cut off the parts I didn’t want and was thrilled to see a snowflake stencil ready for me to use.
The chipboard is very sturdy & flexible
I decided I wanted to make a card. I love shades of blue with silver.  Especially brilliant blues.  And what goes better for a shivery winter card than blue and silver?  I had already made the background paper using Distress Paints for another project (I used Distress Paints in Chipped Sapphire, Stormy Sky & Brushed Pewter and a piece of watercolor paper – the paints were pounced on the craft mat, sprayed with water and the paper was smooshed into the paper), so I just built off of that.
 
Items I used:
Stampin’ Up! Everyday Flexible Phrases Rubber Stamp set
Base card in Cream
Piece of Background Paper, already prepared (see description above)
Piece of Gray cardstock
Piece of gray/blue cardstock
Dylusions Spray Ink in London Blue
Krylon Leafing Pen in Silver
Robin’s Nest Drops
Ranger Archival Ink in Jet Black
Removable Tape (to hold the stencil down. I used blue painters tape)

First step in making this card was I took my background paper, laid the stencil over it and spritzed it with Dylusions in London Blue.  Lifted off the stencil and chose where I was going to trim the paper down. 
You can see the tape marks
Once it was dry, I trimmed it and in the middle of the full snowflakes I added a wee dot of 3D Enamel Gel in Satin Silver. The gel looks blue in some pictures and I am not sure if it picked up some of the spray ink or it is the reflection of the blue in the metallic – makes no difference to me either way – I set the panel aside so I would not smoosh the dots as they dried (and yes, I have smooshed many a drying dot!). 

I took a spare piece of cream cardstock and stamped my little sentiment, Happy Winter, with the Jet Black ink – this was a test since the stamps I used are the old fashioned, can’t see through the wooden block type of stamps, which I had hand mounted.  After a bazillion tries, I think I got it straight enough.  Or, let’s just say it IS straight enough. I mounted that on a piece of grayish blue cardstock & then again on a piece of cream because at this point I was vacillating between a cream or blue card base. 

Back to the panel where I used the snowflake stencil.  I swiped my Krylon Leafing Pen in Silver around the sides of the paper and mounted it on a gray piece of cardstock.  Then I mounted the whole shebang on the card base, which as you can see was decided to be cream and added the three little dots.

The 3DEnamel Gel also works when you want a cute little dot on your card or project, but I haven’t gotten the hang of making them even remotely the same size, so I cheated and used pre-made dots.  I am practicing though & hope my dots will debut soon.

Stay tuned for my third project still using only one set of the Bejeweled Snowflakes set – if that isn’t a good deal, I don’t know what is!  I hope your weather is settling down a bit and that you & yours have a wonderful week!

I would like to enter this card into the following challenges:
Frosted Designs - Winter Blues
Craft Hoarders Anonymous - Challenge 1, Your Signature Style (I love using Distress paints & using products in an unconventional way, ex: the "stencil")
Addicted to Stamps & More - Challenge 81, Anything Goes
Crafting by Design - February Anything Goes
Rhedd & Rosies Challenge Blog - Challenge 25, Anything Goes

Next week is my finale using the same set of Bejeweled Snowflakes - woo hoo!

Monday, February 3, 2014

A New Challenge and a GIVEAWAY!!!

Hi my crafty friends! Happy day after the Super Bowl - boy, am I GLAD that is over. . .now we can get back to our regularly scheduled program :)

First I want to remind all of you that there is a NEW Challenge posted on Anything But a Card - it's a Tic Tac Toe themed challenge and is gonna be SO much fun ~ here is a picture of the elements you can use, but remember, use the items in either a diagonal or horizontal row; just like Tic Tac Toe!


Click on the picture to go to the Anything But a Card blog for further details!


Now for a fantastic giveaway! Globecraft & Piccolo is giving away a $10 gift certificate EVERY DAY from February 2, 2014 to February 8, 2014 - here is what you have to do to be in the running:
  • Leave a comment on daily posts Sunday, February 2nd through Saturday, February 8th
  • You must be a Follower of the Globecraft Piccolo blog
  • You must like us on Facebook (click on the Facebook tab at the top of the blog)
  • Only 1 comment per day per person
  • If you refer a friend and your name is mentioned in their comment, you will get a second entry to the drawing for that day
  • Winners will be chosen by Random.org and announced on Sunday February 9th
  • You can win on multiple days so be sure to visit each day
So to sum it up, we will be awarding 7 people who comment this week; Sunday, February 2nd through Saturday, February 8th a $10 store credit.  

How cool is that! 

Remember, if you are looking for challenges to enter your creations in, please check out Challenges for Days - don't forget to subscribe so you never miss a chance to win some goodies! 

Have a great day! ~Christi~
PS: Please feel free to share this post everywhere & anywhere!